X Series Controller Instructions


April 13, 2020

 

The Growtech X Series is a full spectrum, full cycle LED grow light that when plugged in functions at 100% light intensity and is meant to be used through both vegetative and flower cycles. However, some growers require less light intensity (vertical farmers, for example, who need the fixture very close to the plant canopy). For these situations we have the optional Zigbee Gateway/Controller system that, along with controlling light intensity, gives the ability to program timers eliminating the need for a manual timer. By connecting the gateway device directly to your router and the controller device into any Growtech X fixture, through WiFi you can wirelessly control light intensity and program timers from any mobile device with the use of the iLightsIn Pro app. Multiple fixtures can be daisy-chained together and up to 50 can be controlled simultaneously with a single controller. 

The Zigbee Gateway and Controller package is designed to be used specifically with any Growtech X Series fixture (cannot be used with original Growtech series fixtures). 

For more information on, or to purchase the Gateway/Controller package

CLICK HERE

 

Instructions

Step 1: Download the iLightsIn Pro application

Apple users: https://apps.apple.com/us/app/ilightsin-pro/id1322295054?ign-mpt=uo%3D4

Android usershttps://play.google.com/store/apps/details?id=com.homa.ilightsinv2&hl=en_US

Step 2: Connect the Zigbee gateway device directly into your router. 

Step 3: Plug the dimming output wire of the controller directly into the dimming input wire on your Growtech X fixture.

Step 4: Next, follow the instructions in the included Zigbee gateway manual to connect to the controller and begin controlling your Growtech X fixture wirelessly via any mobile device with the use of the downloaded iLightsIn Pro app. 

DOWNLOAD GATEWAY MANUAL HERE

 



Leave a comment

Comments will be approved before showing up.